Table of Contents
Advertisement
Checking the power consumption
This function will display the amount of electricity consumed by operating the air conditioner.
When the air conditioner is operating;
Indoor unit display
using the auto clean function
Auto clean function will minimise the moisture inside of the indoor unit. Activate this function to help provide you with
clean air.
When the air conditioner is operating;
Indoor unit display
NA_BETTER_A3050_IB&IM_EN_DB68-05012A.indd 25
1 . Press the Settings button .
2 . Press the
button until (Usage) indicator starts to blink .
3 . Press the SET button to check the power consumption .
- (Usage) will blink on the remote controller display and disappear .
- Indoor unit will display the amount of Power consumption for few seconds and
then return to usual status by displaying the set indoor temperature.
- Power consumption will be calculated from the moment the air conditioner is
turned on and calculated value will be reset when the air conditioner turns off.
- 0.1 is the default value of the electricity consumption and 99 is the maximum
value. Unit is in kWh.
• When the air conditioner is not operating, power consumption will not
be displayed on the indoor unit display.
1 . Press the Settings button .
2 . Press the
button until (Clean) indicator starts to blink .
3 . Press the SET button to set the Auto clean function .
- (Clean) indicator will be displayed on the remote controller display and Auto
clean (
) and Timer ( ) indicator will turn on the indoor unit display . Auto
clean function will be activated after the air conditioner stops operating .
- Duration of the Auto clean function can be different depending on the previous
operation mode used.
Auto(cool), Cool, Dry mode : 30 minutes.
Auto(heat), Heat, Fan mode : 15 minutes.
f Press the Settings button again to make the (Clean) indicator blink and
f
Cancel
press the SET button .
• When the operation mode is set during Auto clean function is activated,
the air conditioner will operate in chosen operation mode and the Auto
clean function will be re-activated when the operation stops.
• During the auto clean function, indoor fan will continue to run and air
flow blade will remain open to expel ambient air.
•
lighting in Auto clean mode.
English-25
11/20/2014 3:18:12 PM
Advertisement
Table of Contents
