Using The Single User Function - Samsung AR**JV5D series User's Installation Manual

using the Single user function

This function will reduce the energy usage while the air conditioner is operating in Cool/Heat mode.
When the air conditioner is operating in Cool/Heat mode;
Remote controller display
You can adjust the set temperature by 1 °C within the range of 24 °C ~ 30 °C in Cool mode and 16 °C ~ 30 °C
in Heat mode . .
(Auto),
Vertical/Horizontal air swing can be selected .
NA_BETTER_A3050_IB&IM_EN_DB68-05012A.indd 22
1 . Press the Options button .
2 . Press the
3 . Press the SET button to set the Single user function .
- (Single user) will blink first, then remain on the display as (Single user) . Then
will be displayed on the set temperature indicator part for few
seconds and Single user function will begin .
- When the Single user function is on, vertical air swing will turn on automatically .
- If the current set temperature is lower than 24°C in Cool mode, it will be
automatically raised to 24 °C.
f Press the Options button again to make the (Single user) indicator
f
Cancel
blink and press the SET button .
• Single user function is only available in Cool/Heat mode.
• If the Single user function is selected while Fast/Comfort function is
on, corresponding function will be cancelled .
• Vertical air swing will remain on even after the Single user function is
cancelled.
additional options available in Single user function
(Low), (Med), (High), (Turbo) can be selected .
English-22
button until (Single user) indicator starts to blink .
11/20/2014 3:18:10 PM