Starting Smartthings App; Checking The Power Connections; Setting Up And Connecting To A Wi-Fi Access Point Using Your Smartphone - Samsung Wi-Fi Kit MIM-H03U User & Installation Manual

Starting SmartThings app

To use the SmartThings app, connect the product to the network in the sequence described below.
The images shown may differ depending on your smartphone model, OS version and manufacturer.
You need to set up the Wi-Fi access point only when connecting the product to a Wi-Fi network. Once the product is
connected, you can use the SmartThings app via Wi-Fi, 3G, LTE or more wireless networks.

Checking the power connections

Check if the power is connected to the product and the access point.

Setting up and connecting to a Wi-Fi access point using your smartphone

1. To connect the product to a Wi-Fi network, turn on Wi-Fi at "Settings > Wi-Fi", and then select the access point to connect
to
Only alphanumeric characters are supported for wireless access point names (SSIDs).
If an SSID has a special character, rename it before connecting to it.
This product supports only Wi-Fi 2.4 GHz.
On
2. Turning off "SMART NETWORK SWITCH" at "Settings > Wi-Fi" on your Smartphone
If "SMART NETWORK SWITCH" or "Adaptive Wi-Fi" is turned on, you cannot connect to the network. Be sure to turn off
these functions before connecting to the network.
Off
• The setup may differ depending on your smartphone model, OS version and manufacturer.
NOTE
3. Checking the Internet connectivity
After connecting to Wi-Fi, check that your smartphone is connected to the Internet.
• A firewall may prevent your smartphone from connecting to the Internet. In this case, contact your Internet service
provider for troubleshooting.
NOTE
Select
SAMSUNG_2G
SAMSUNG_5G
Off
15