Table of Contents
Advertisement
Smart install
Through Smart install function, installer can check if the installation was done properly.
If the installation was not done properly, error indicator will turn on the indoor unit display.
Therefore user will know if the installation was done properly or not.
Checking the power consumption
This function will display the amount of electricity consumed by operating the air conditioner.
(You have to use the remote controller to check the power consumption but it will not be
displayed on the remote controller display.)
Press the 2
F button and then press the Usage button on the remote controller while the air
nd
conditioner is operating.
When the air conditioner is not in use, power consumption will not be displayed on the indoor
unit display even if you press the 2
Indoor unit will display the amount of Power consumption for few seconds and then return to
usual status by displaying the indoor temperature.
Power consumption will be calculated from the moment the air conditioner is turned on and
calculated value will be reset when the air conditioner turns off.
0.1 is the default value of the electricity consumption and 99 is the maximum value. Unit is in kWh.
NA_BETTER_A3050_IB&IM_EN_DB68-04388A-00.indd 11
F → Usage button.
nd
English-11
12/23/2013 10:24:56 PM
Advertisement
Table of Contents
