Table of Contents
Advertisement
2-Step cooling function
2-Step Cooling function will set the air conditioner to cool the room quickly to reach the set temperature when the indoor
temperature is higher than the set temperature, and then the air conditioner will automatically operate in Dry mode when
indoor temperature reaches set temperature .
When the air conditioner is operating in Cool mode;
Remote controller display
NA_BETTER_A3050_IB&IM_EN_DB68-05012A.indd 20
1 . Press the Options button .
2 . Press the
button until (2-Step) indicator starts to blink .
3 . Press the SET button to set the 2-Step Cooling function .
- (2-Step) will blink first, then remain on the display as (2-Step) and 2-Step
Cooling function will begin .
f Press the Options button again to make the (2-Step) indicator blink
f
Cancel
and press the SET button .
English-20
11/20/2014 3:18:06 PM
Advertisement
Table of Contents
