using the Virus Doctor function
This function will produce positive ions and supply them into the airflow.
When the air conditioner is operating;
Remote controller display
NA_BETTER_A3050_IB&IM_EN_DB68-05012A.indd 24
1 . Press the Options button .
2 . Press the
button until (
3 . Press the SET button to set the Virus Doctor function .
- ( ) will blink first, then remain on the display as (
will begin .
f Press the Options button again to make the (
f
Cancel
press the SET button .
• Virus Doctor lamp will turn on when the Virus Doctor function turns
on, and it will turn off when the function is cancelled .
• Virus Doctor function can be selected while Auto/Cool/Dry/Fan/Heat
mode is on .
• Set temperature can be adjusted.
• There will not be much difference on energy consumption and
operating noise when the Virus Doctor function is selected additionally
while the other function is on.
• When the Virus Doctor function is selected with other operation mode,
pressing the Power button will stop the operation.
English-24
) indicator starts to blink .
) and Virus Doctor function
) indicator blink and
11/20/2014 3:18:11 PM