Using The Single User Function; Options - Samsung F-AR12FSSSCWK1 User Manual

using the Single user function

This function will reduce the energy usage while the air conditioner is operating in Cool/Heat mode.
When the air conditioner is operating in Cool/Heat mode;
Remote controller display
You can adjust the set temperature by 1 °C within the range of 24 °C ~ 30 °C in Cool mode and 16 °C ~ 30 °C
in Heat mode .
(Auto),
Vertical/Horizontal air swing can be selected .
A3050 Australia_IB&IM_DB68-05206A_EN.indd 23
1 . Press the Options button .
, or Options button until (Single user) indicator starts to blink .
2 . Press the
3 . Press the SET button to set the Single user function .
- (Single user) (Single user) indicator will be displayed on the remote controller
display . Then
part for few seconds and Single user function will begin .
- When the Single user function is on, vertical air swing will turn on automatically .
4. If the current set temperature is lower than 24°C in Cool mode, it will be automatically
raised to 24 °C .
f Press the Options button  Press the
Cancel
make the (Single user) indicator blink and press the SET button .
• Single user function is only available in Cool/Heat mode.
• If the Single user function is selected while 2-Step Cooling/Fast/Comfort /
Quiet/
• Vertical air swing will remain on even after the Single user function is
cancelled.
additional options available in Single user function
(Low), (Med), (High), (Turbo) can be selected .
English-23
will be displayed on the set temperature indicator
, or Options button to
function is on, corresponding function will be cancelled .
2014/12/29 19:07:23