Radio - Panasonic SC-MAX4000 Operating Instructions Manual

Radio

Preparation
Press [CD/RADIO/AUX] to select "FM" or "AM".
Manual tuning
Press [3] or [5] to tune in to the station.
To tune automatically, press and hold the button until the
frequency starts changing quickly.
"STEREO" is shown when a stereo broadcast is being
received.
Using the main unit
1
Press [TUNE MODE] to select "MANUAL".
2
Press [2/3] or [5/6] to tune in to the
station.
Memory presetting
You can preset up to 30 FM and 15 AM stations.
█
Automatic presetting
1
Press [AUTO PRESET] to select "LOWEST" or
"CURRENT".
LOWEST Tuning begins from the lowest
frequency.
CURRENT Tuning begins from the current
frequency.
2
Press [OK] to start presetting.
The tuner presets all the stations it can receive into
the channels in ascending order.
To cancel, press [8].
█
Manual presetting
1
Press [3] or [5] (main unit: [2/3] or
[5/6]) to tune in to the station.
2
Press [OK].
3
Press the numeric buttons to select a preset
number.
Do steps 1 through 3 again to preset more stations.
The new station replaces any station that occupies
the same preset number.
█
Selecting a preset station
Press the numeric buttons, [2] or [6] to select
the preset station.
Using the main unit
1
Press [TUNE MODE] to select "PRESET".
2
Press [2/3] or [5/6] to select the preset
station.
Improving the sound quality
When "FM" is selected
1
Press [PLAY MENU] to select "FM MODE".
2
Press [Y, U] to select "MONO" and then press
[OK].
To cancel, select "STEREO".
"MONO" is also cancelled when you change the
frequency.
To memorise the setting
Continue with step 2 of "Manual presetting".
When "AM" is selected
1
Press [PLAY MENU] to select "BEATPROOF".
2
Press [Y, U] to select the setting that provides the
best reception and then press [OK].
AM allocation setting
By main unit only
This system can also receive AM broadcasts allocated in
10 kHz steps.
1
Press [CD/RADIO/AUX] to select "FM" or "AM".
2
Press and hold [CD/RADIO/AUX].
After a few seconds, the display panel shows the current
minimum radio frequency. Release the button when the
minimum frequency changes.
• To go back to the initial setting, do the above steps
again.
• Preset frequencies are erased after you change the
setting.
11
11