Ultra Start 25 series Install Manual page 18

INSTALL MANUAL
PAGE 18
Menu 2- Additional Settings
Setting 3 Siren Chirp Timing
1) 5 ms Pulse Output
2) 15 ms Pulse Output
*3) 10 ms Pulse Output
Press & Release the Program Button 3 Times (Setting 3) confirmed 3 LED flashes.
Press & Hold the Program Button until the appropriate # of park light/siren chirps, then release.
Press & Release the Program Button to proceed to the next step.
Setting 4 Button Operations
1) Trunk Release
2) Garage Door Interface 2 Flashes/Chirps
*3) Car Finder
Press & Release the Program Button 4 Time (Setting 4) confirmed 4 LED flashes.
Press & Hold the Program Button until the appropriate # of park light/siren chirps, then release.
Press & Release the Program Button to proceed to the next step.
Setting 5 N/A (Automatic units only)
Setting 5 Reservation Mode ( "M" units only)
1) Manual Reservation
*2) Auto Reservation 2 Flashes/Honks Activate Reservation Mode by pressing brake
Press & Release the Program Button 5 Time (Setting 5) confirmed 5 LED flashes.
Press & Hold the Program Button until the appropriate # of park light/horn (optional)honks, then release.
Press & Release the Program Button to proceed to the next step.
Menu 3- Starter Settings
Ignition 3x
On/Off
On/Off On
Setting 1 Special Door Lock/Unlock Operations
1) Type 1 1 Flash/Honk
2) Type 2 2 Flashes/Honks
*3) Type 3 3 Flashes/Honks
Press & Release the Program Button 1 Time (Setting 1) Confirmed with 1 LED flashes.
Press & Hold the Program Button until the appropriate # of park lights/horn (optional) honks, then release.
Press & Release the Program Button to proceed to the next step.
1 Flash/Chirp
2 Flashes/Chirps
3 Flashes/Chirps
1 Flash/Chirp
3 Flashes/Chirps
1 Flash/Honk
Press and
Press and
Release the
Release the
Program
Button
Menu 3
Short(Quiet) siren Output
Long(Loud) siren Output
Normal(Medium) siren Output
Button activates Trunk Release
Button activates Garage Door Interface
Button activates Car Finder Mode
Activate Reservation Mode by pressing
Press and Release
the Program Button
# of Times for
button for
Setting Chosen
Unlock before start. Lock pulse after start and shutdown.
Lock pulse ONLY after remote start shutdown.
Default Lock/ Unlock Pulses.
REMOTE VEHICLE STARTER
- continued
Press and Hold
the Program Button
to Change Option
(Factory Alarm Rearm).
Button