Panasonic U-26PE1U6 Technical Data & Service Manual page 296

<Procedure of CZ-RTC3 / CZ-RTC5>
1 Keep pressing the
for 4 or more seconds.
The "Maintenance func" screen appears on the LCD display.
2 Press the
Select "3. RC. setting mode" on the LCD display and press
the button.
3 The "RC. setting mode" screen appears on the LCD display.
Change the "Code no." by pressing the
4 Select the "Set data" by pressing the
Select one of the "Set data" by pressing the
Then press the
<Procedure of CZ-RTC4>
1 Press the remote controller
button at the same time.
(Press and hold for 4 seconds or longer.)
2 Select the "CODE No." by pressing the temperature setting
/ button.
3 Select the "SET DATA" by pressing the
4 Then press the
Finally, press the button.
6
, and
or button to see each menu.
or
or
button.
button and
A
button.
buttons simultaneously
button.
button.
or button.
Code
no.
01
02
32
CODE
No.
Room temperature sensor Main unit
button.
6-12
Maintenance func 20:30 (THU)
1. Outdoor unit error data
2. Service contact
3. RC. setting mode
4. Test run
Sel. Page [ ] Confirm
RC. setting mode 20:30 (THU)
Code no. Set data
01 0001
Sel. Next
Set Data
ITEM
0000
Main/sub Sub
Clock type 24 hours
Temp sensor setting Main unit
SET DATA
ITEM
Main/sub Sub
Clock type 24 hours
RC. CK
RC. CK
6. Test run
0001
Main
12 hours
(AM/PM)
RC
Main
12 hours
(AM/PM)
Normal
RC