Checking The Remote Controller; Remote Controller Buttons - Samsung AR**HV5D series User's Installation Manual

Checking the remote controller

• Point the remote controller towards the remote controller receiver of the indoor unit.
• W hen you properly press the button on the remote controller, you will hear beep sound from the indoor unit and a transmit
indicator( ) appears on the remote controller display.

Remote controller buttons

Remote controller display
Set the Virus Doctor function on/off.
Fast / Comfort
Select Fast function or Comfort function
Turn on/off the Single User function
which reduces energy usage while
operating in cool/heat mode.
Increase/Decrease the temperature by 1 ˚C.
Auto clean function – Dry inside of the
indoor unit to get rid of odor.
The d'light Cool function is not available
Set the On Timer on.
Set the Off Timer on.
Filter Reset
Reset the Filter Clean reminder
Usage
Display the amount of power consumption for few seconds on
the indoor unit display:
Beep off
To silence the beep sound when pressing the button.
• W hen you press 2
functions on the remote controller as listed below.
Single User  Filter Reset, d'light Cool  Usage, Auto Clean  Beep Off, good' sleep  Display Off function.
If you select the function under the button while the function of the button is switched by 2
function is canceled.
NA_BETTER_A3050_IB&IM_EN_DB68-04388A-00.indd 13
Virus Doctor
Single User
Temp + -
Auto Clean
d'light Cool
for this model.
On Timer
Off Timer
F button, the
indicator will be displayed on the remote controller and you can change the
nd
English-13
Power
Turn on/off the air conditioner.
Mode
Set one of the 5 operating modes
(see pages 15~16 for instructions).
Quiet
Reduce noise generated from an indoor
unit during operation.
Vertical air swing
Activate/Deactivate air flow blade movement
automatically up and down.
Fan
Adjust how much air flows through the air
conditioner with the 5 different fan speeds
such as Auto/Low/Medium/High/Turbo.
Horizontal air swing
Activate/Deactivate air flow blade
movement automatically left and right.
Set the
Set/Cancel
Set/Cancel the timer/
SMART Air conditioner Network.
The SMART Air conditioner Network is not
available for this model.
2 F
nd
Switch the function of the button on the
remote controller.
Display off
To turn off the display light
mode on.
mode.
F button, the 2 F
nd nd
12/23/2013 10:24:58 PM