If These Messages Appear - Panasonic KX-VC300 Operating Instructions Manual

Additional Information

If These Messages Appear

Message
Call FAILED. Encryption
settings (On/Off) must match.
Please change the encryption
setting on one side and try
again.
Call Failed due to wrong
encryption key. Please
contact your installer.
Check the Main Camera
connection.
Unable to register, the contact
list is full.
Invalid IP Address.
Invalid Subnet mask.
Invalid Default Gateway.
Invalid Date/Time.
130 Operating Manual
•
The encryption settings do not match those of the other party in a video
conference call.
→
Change the encryption settings to match those of the other party
(Page 91, Page 103).
•
The encryption key settings do not match those of the other party in a
video conference call.
→
Ensure your encryption key setting matches the other party's
(Page 103).
•
A cable or cord is not properly connected.
→
Check that all cables to the unit are connected properly (Page 19).
•
The signal input from the main video camera is invalid.
→
A valid signal cannot be received from the connected main video
camera. Contact your dealer.
•
The contact list has reached its maximum capacity.
→
Delete unneeded contacts (Page 86).
•
The format of the entered IP address is invalid.
→
Enter the IP address correctly, in the format XXX.XXX.XXX.XXX
(decimal values separated by periods). For values of only 1 or 2 digits,
enter these numbers as they are. Do not enter like [.001].
Example: The IP address is [192.168.0.1].
–
Correct entry: [192.168.0.1]
–
Wrong entry: [192.168.000.001]
Multicast or broadcast addresses cannot be used.
•
The input subnet mask is invalid.
→
Enter a valid subnet mask. For values of only 1 or 2 digits, enter these
numbers as they are. Do not enter like [.001].
Example: The subnet mask is [255.255.255.0].
–
Correct entry: [255.255.255.0]
–
Wrong entry: [255.255.255.000]
•
The input default gateway is invalid.
→
Enter a valid default gateway. For values of only 1 or 2 digits, enter
these numbers as they are. Do not enter like [.001].
Example: The default gateway is [192.168.0.1].
–
Correct entry: [192.168.0.1]
–
Wrong entry: [192.168.000.001]
•
Enter a date within the valid parameters.
→
Enter a date between January 1, 2012, and December 31, 2035.
Cause and Solution
Document Version 2012-03