Example Of Teach In Programming - Pfaff 421E1 Instruction Manual

Program the fourth (last) seam section:
This seam section should have
- stitch counting (1 stitch)
- and a stitch length of 3.5 mm.
Select the seam section end function (number key 9).
Select the stitch counter function to open the input menu.
Enter the number of stitches.
Enter
Confirm the entry with the Enter key.
Enter
Confirm the seam section end by pressing the Enter key.
Select the stitch length function (number key 4).
3 5
Enter the stitch length.
Enter
Confirm with the Enter key.
Select the program end function (number key 0).
Enter
Confirm the decorative seam by pressing the Enter key.
11

Example of Teach In programming

.15.03
The following seam is to be created:
Seam section 1
The seam to be programmed is:
- to contain 3 seam sections
- and to be saved with the comment „Learn"
- at program number 8.
Seam section 2
Seam section 3
Programming
11 - 32