Example For Programming A Decorative Seam - Pfaff 421E1 Instruction Manual

Programming
11

Example for programming a decorative seam

.15.02
The decorative seam to be sewn should have:
- four seam sections
- and be saved with the comment „Deco 1"
- at program number 6
6
Enter
Enter
This seam section should have
- stitch counting (1 stitch)
- and a stitch length of 2 mm.
0
2
Enter
11 - 29
Select INPUT mode.
Select the programming function.
Enter the program number.
Confirm this entry with the Enter key.
Enter comment (see chapter 11.15.01 Example for programming a seam).
Confirm with the Enter key.
NO. OF STITCHES 0
# 1
1 2 3 4 5 6 7
Fig. 11 - 56
Program the first seam section.
Select the stitch length function (number key 4).
Enter the stitch length (see chapter 11.15.01 Example of seam programming).
Confirm with the Enter key.
NO. OF STITCHES 0
# 1
1 2 3 4 5 6 7
Fig. 11 - 57
Select the seam section end function.
Enter
8 9 0
Enter
8 9 0
Esc
Clear
Esc
Clear