Paper Jam Inside Of Machine - Samsung CLX-6220 Troubleshooting Manual

Code
01-009
Symptom

Paper jam inside of machine

1. At Power On, the paper is jamming at Regi sensor or Feed sensor.
2. At printing, the paper is detecting at Regi sensor or Feed sensor continuously.
3. At printing, the paper is not detected at exit sensor within a predetermined time.
Possible Cause
1. Feed sensor or Regi Sensor is defective.
2. Exit sensor is defective.
3. Feed Clutch is defective.
4. Regi Clutch is defective.
Troubleshooting method
1. Check the Spring tension of the Regi. roller and Regi shaft. If the spring is defective, replace it.
2. Check and replace the exit sensor.
3. Check the connectors are plugged in properly on the flat cable / exit sensor harness / Feed sensor harness.
4. Check the OPC motor is working. / OPC lock.
5. Check PTB [paper transfer belt] working condition, if PTB-Belt is torn replace it.
6p Feed/Tray 6p Feed/Tray
empty empty
Service Manual
Alignment & Troubleshooting
Error message
Paper jam inside of machine
Flat Cable Flat Cable
4-35
3p Exit sensor 3p Exit sensor
Samsung Electronics