Direct Pc-Link - ELNA 9600 "Haute Couture" Instruction Manual

USB USB
Edit
Open File
Location :
PC
Embf

Direct PC-Link

Connecting the machine and PC
This machine can be connected to the PC with the USB
cable included in the standard accessories.
You need to install the USB driver for the machine and
the PC Folder Tool on your computer.
The USB driver and PC Folder Tool are available in the
M860 Tools CD-ROM included in standard accessories.
The PC Folder Tool allows you to transfer the data
bilaterally between the machine and PC.
NOTE:
Refer to the instruction booklet of the M860 Tools
CD-R for more details.
Start up the machne and PC, and insert the type "A" USB
connector into the PC.
Insert the type "B" connector into the machine.
Press the PC-link tab to establish the communication
between the machine and PC.
Now, you can save and open the files, or transfer the data
between the machine and PC.
Built-in
ATA
A
Card
USB
memory
CAUTION:
CD
Do not turn the power off or disconnect the USB cable
ROM
while the data transfer is in progress.
PC
Otherwise the data will be lost or the memory
will be damaged.
97