Embroidery Mode Embroidery Hoops - ELNA 9600 "Haute Couture" Instruction Manual

5
2
4
1
STARTING POINT FOR MONOGRAMMING
8
A
7
5
1
4
6
3
9
6
STARTING POINT
3
2
7
STARTING POINT
EMBROIDERY MODE
Embroidery Hoops
Embroidery hoop ST:
This is the standard size hoop, with a 12.6 cm (5") by 11
cm (4-3/8") embroidery area for sewing the built-in
embroidery designs etc.
1 Outer hoop
2 Inner hoop
3 Attaching knob
4 Hoop tightening screw
5 Template
Template for embroidery hoop ST
6 Indicates the embroidery boundary for built-in
designs, PC Design Card Nos. 1001 and up
7 Starting point for built-in designs
8 Starting point for monogram in horizontal
orientation
9 Starting point for monogram in vertical
orientation
Embroidery hoop SQ:
This is the large-size hoop, with a 20 cm (8") by 20 cm
(8") embroidery area for sewing large-size designs and
combined designs.
1 Outer hoop
2 Inner hoop
3 Attaching knob
4 Hoop tightening screw
5 Template
Template for embroidery hoop SQ
6 Starting point for built-in designs
7 Indentations for positioning the template
NOTE:
The four indentations on the template do not correspond
with the reference lines.
NOTE:
Refer to page 91 for the instructions on hoop AQ.
64