Correcting Deformed Stitch Patterns - ELNA 9600 "Haute Couture" Instruction Manual

Correcting Deformed Stitch Patterns

The sewing results of the stretch stitch patterns may
vary depending upon the sewing conditions, such as
sewing speed, type of the fabric, number of layers etc.
Always make test sewing on a scrap piece of the fabric
that you wish to use.
If decorative stitch patterns, letters, numbers or the
manual buttonhole stitch are deformed, correct them
with the feed balancing dial.
NOTE:
In normal sewing, set the feed balancing dial to the
neutral position, i.e. the groove on the dial is centered
with the standard setting mark.
Decorative stretch stitch patterns
If the pattern is compressed, turn the dial in the
(+) (–)
direction of "+".
If the pattern is drawn out, turn the dial in the direction
of "–".
Letters and numbers
If the pattern is compressed, turn the dial in the
(+) (–)
direction of "+".
If the pattern is drawn out, turn the dial in the direction
of "–".
Stitch balance of the auto buttonhole
The stitch balance of the right and left rows on the auto
(–)
(+)
buttonhole may vary depending on conditions of
sewing. If the stitches are not balanced, correct the
unevenness with the feed balancing dial.
If the right row is denser, turn the dial in the direction
of "+".
If the left row is denser, turn the dial in the direction
of "–".
NOTE:
Return the feed balancing dial to its neutral position
when the sewing is finished.
63