Editing Mode - ELNA 9600 "Haute Couture" Instruction Manual

Designs
ST: 126x110mm
A
38
37
41 42
45 46
4/22
39
40
A Z
43 44
47 48

Editing Mode

In the editing mode, you can edit and combine designs
to create your original embroidery.
Press the editing mode key to open the editing window.
Selecting the hoop
You need to select the appropriate hoop before editing
the designs.
Press the hoop selection key and the hoop selection
window will open.
Select one of the following hoops and press the OK key.
- Embroidery hoop ST: 126 mm by 110 mm
- Embroidery hoop SQ: 200 mm by 200 mm
- Embroidery hoop AQ: 140 mm by 200 mm (exclusively
for Advanced Quilting, see pages 88-93)
- Free-arm hoop FA: 50 mm by 50 mm (optional item)
- Embroidery hoop MA: 200 mm by 280 mm (optional
item)
- Embroidery hoop RE: 140 mm by 200 mm (optional
item)
- Embroidery hoop HH: 100 mm by 90 mm (optional
item)
The editing window will open in the selected hoop size.
NOTE:
To select the embroidery hoop HH, first you need to
select the hoop RE.
Please refer to the instruction sheet of the Hat Hoop for
how to use it.
Opening the embroidery designs
You can open the built-in designs, monogram, and
designs from the optional PC cards, CD-ROM drive and
USB memory key in the editing window.
To import design patterns into the editing window, select
the desired pattern in the pattern selection window.
The screen will return to the editing window with the
selected pattern displayed in the editing window
82