ELNA 9600 "Haute Couture" Instruction Manual page 90

1000x500mm
[ mm ]
498
1000
1000x500mm
[ mm ]
104%
166
125
Calculating the optimum pattern size
Select the desired AQ design pattern and a window for
selecting the single pattern adjustment or the AQ
Calculator will open.
Press the general arrangement
Calculator for calculating and adjusting the general
arrangement.
Enter the size of the embroidery area to be stippled.
The embroidery area should be smaller than the overall
size of the quilt since a 7-10 cm (3"-4") allowance around
the area is necessary to fasten the quilt layers to the hoop.
Press the
Press the OK key to calculate the optimum size of the
design pattern.
The adjusted overall size and the number of patterns to fill
the embroidery area will be shown.
8
104%
Adjust the number of patterns by pressing the "+" or "–" key
if necessary.
3
92%
Press the
centers of the neighboring patterns.
8
To return to the previous display, press the
3
92%
Press the OK key and the confirmation window will open.
Check the size and stitch image of the stippling pattern and
press the file save key to save the adjusted design pattern
(see page 94) for printing the template sheet (see the
instructions for AQ Print Tool).
89
key to open the AQ
or key to select the width or length.
key to view the distance between the
key.