Customizing Embroidery Mode Settings Embroidery Mode Settings - ELNA eXpressive 830L Instruction Book

!4
q
w
e
r
t
!4 Auto-off (Time Setting)
The machine will be automatically turned off if you do not
use the machine within the time period set by this timer.
The auto-off timer can be set from 1 to 12 hours.
If you wish to turn off the timer, press and hold the "+" key
until "OFF" shows in the timer window.
To turn on the machine again, turn the power switch on.
NOTE:
The auto-off timer is available in EU countries and
some regions which use 200 - 240 voltage standards.
CUSTOMIZING EMBROIDERY MODE
SETTINGS
Embroidery Mode Settings
Press the embroidery setting mode tab (refer to page 54).
q Auto thread tension
The auto thread tension level can be adjusted with the
"+" or "–" key. Increase the value when using the same
threads on the bobbin and needle.
w Low bobbin thread warning
The low bobbin thread warning level can be adjusted with
the "+" or "–" key. To turn this option off, press the "–" key
until "OFF" shows in the window.
Press the next page key to go to the next menu.
e Maximum embroidery speed
The maximum embroidery sewing speed can be set from
400 to 860 spm in 100 spm intervals by pressing the "+"
or "–" key.
NOTE:
Sewing with default speed setting (600 spm) when
using embroidery hoop RE36b. Sew with high speed
may cause distortion of the embroidery patterns.
r One stitch stop
When this function is turned on, the machine sews one
stitch and stops automatically so that you can bring the
bobbin thread up before sewing.
t Consecutive color grouping
If an imported design files of a pattern combination
contain consecutive sections in the same color, these
sections are automatically grouped together as one
section when opening the file or going to the Ready to
Sew window. This function is invalid when combining the
built-in designs and externally sourced designs.
Turn this option off if you do not wish to group the
sections together.
57