Preparation
9
Removing/inserting the bobbin case
.03
9
Threading the bobbin case, adjusting the thread tension
.04
9 - 3
2
1
Fig. 09 - 03
1
+
2
Fig. 09 - 04
Removing the bobbin case.
Lift clip 1 and remove bobbin case 2.
Inserting the bobbin case:
Insert bobbin case 1 until you feel it click
into place.
49-059
Insert bobbin 1 into bobbin case 2.
Guide the thread through the slot under
spring 3.
Adjust the thread tension by turning
screw 4.
3
_
4
Switch off the machine!
Danger of injury if the machine
is started accidentally!
When the thread is pulled the
bobbin 1 must rotate in the
direction of the arrow.