Table of Contents
Advertisement
Input
11 - 13
Switch on the machine.
Call up the input mode.
Call up the "creating/adjusting a seam program" function and enter program number "4".
Set the seam type (right seam) by pressing until the appropriate symbol appears.
Call up the menu for comment input.
Enter the comment "PROG" with the keyboard and number panel.
Conclude the comment input.
Change to the input of the first seam section.
Enter the value "-25" for the fullness.
Call up the menu for the input of the end of the seam section.
Switch on the stitch count function to change to the next seam section, and set value
"40" for the number of stitches.
Advertisement
Table of Contents
