Waste Disposal; Motor Oil Disposal; Battery Disposal - Exmark LAZER Z Operator's Manual

For Exmark Mower Parts Call 606-678-9623 or 606-561-4983
4.2.13 Motion Control Damper Adjustment
4.2.14 Caster pivot bearings pre-load adjustment:

5. WASTE DISPOSAL

5.1 MOTOR OIL DISPOSAL

Engine oil and hydraulic oil are both pollutants to the environment. Dispose of used oil at
a certified recycling center or according to your state and local regulations.

5.2 BATTERY DISPOSAL

a) The top damper mounting bolt can be adjusted to obtain a more desired
motion control lever resistance. See Figure 15 for mounting options.
a) Remove dust cap from caster and tighten
nyloc nut until washers are flat and back off
1/4 of a turn to properly set the pre-load on
the bearings. If disassembled, make sure
the spring washers are reinstalled as shown
in Figure 16.
POTENTIAL HAZARD
♦ Battery electrolyte contains sulfuric acid,
which is poisonous and can cause severe
burns
WHAT CAN HAPPEN
♦ Swallowing electrolyte can be fatal or if it
touches skin can cause severe burns.
HOW TO AVOID THE HAZARD
♦ Wear safety glasses to shield eyes, and
rubber gloves to protect skin and clothing
when handling electrolyte.
♦ Do not swallow electrolyte.
www.mymowerparts.com
FIGURE 15
DANGER
41
FIGURE 16