Exmark LAZER Z Operator's Manual page 29

For Exmark Mower Parts Call 606-678-9623 or 606-561-4983
4.1.3
4.1.4
Clean engine cooling system:
Service Interval: Daily or more often in dry conditions
POTENTIAL HAZARD
♦ Excessive debris and damaged or
missing rubber baffles can cause the
engine and hydraulic system to overheat.
WHAT CAN HAPPEN
♦ Excessive debris around the engine
cooling air intake and inside of the pump
drive belt compartment can create a fire
hazard.
HOW TO AVOID THE HAZARD
♦ Clean all debris from inside of pump drive
belt compartment daily.
Information located:
•
On right fuel tank decals 103-4474 (all units except
Kohler EFI) and 103-5456 (Kohler EFI units)
•
ON decal 1-633462 behind seat on rubber heat
shield flap.
a) Stop engine, wait for all moving parts to stop, and remove key. Engage
parking brake.
b) Clean all debris from rotating engine air intake screen and from around
engine shrouding.
c) Clean all debris from inside of pump drive belt compartment.
d) Inspect rubber engine baffles for proper fit. Replace if necessary.
Clean grass build-up under deck:
Service Interval: Daily
a) Stop engine, wait for all moving parts to stop, and remove key. Engage
parking brake.
b) Raise deck to the transport (5" (12.7 cm) cutting height) position. Lift the
front of unit and support unit using jack stands or equivalent support.
www.mymowerparts.com
CAUTION
24