Dimensions; Torque Requirements - Exmark LAZER Z Operator's Manual

For Exmark Mower Parts Call 606-678-9623 or 606-561-4983
2.9.6 Deck: Full floating deck is attached to out-front support frame. Six anti-scalp rollers
2.9.7
2.9.8

2.10 DIMENSIONS

2.10.1
2.10.2 Overall Length:
2.10.3 Overall Height:
2.10.4
2.10.5
2.10.6 Curb Weight:

2.11 TORQUE REQUIREMENTS

Bolt Location
Blade Drive Sheave Mounting Nut ...............................90-110 ft-lbs. (122-149 N-m)
Cutter Housing Spindle Nut ......................................160-185 ft-lbs. (217-251 N-m)
Blade Mounting Bolt (lubricate with anti-seize)...................55-60 ft-lbs. (75-81 N-m)
Engine Deck/Front Frame Mount Bolts ..............................30-35 ft-lbs. (41-47 N-m)
Anti-Scalp Roller (See Figure 7)
Engine Mounting Bolts ......................................................30-35 ft-lbs. (41-47 N-m)
Wheel Lug Nuts .............................................................90-95 ft-lbs. (122-129 N-m)
Wheel Motor Mounting Bolts............................................72-77 ft-lbs. (98-104 N-m)
Wheel Hub Slotted Nut ..............................................minimum125 ft-lbs. (169 N-m)
Rollover Protection System (Roll Bar) Mounting Bolts .......30-35 ft-lbs. (41-47 N-m)
Deck Drive Jackshaft Nut ..............................................75-80 ft-lbs. (102-108 N-m)
Clutch Retaining Bolt (secured with threadlocker)..............55-60 ft-lbs. (75-81 N-m)
provide maximum turf protection. Deck design allows for bagging, mulching or side
discharge.
Deck Depth: 60" Deck: 6.0" (15.2 cm)
66" Deck: 6.0" (15.2 cm)
72" Deck: 6.0" (15.2 cm)
Cutting Height Adjustment: an extra-long cushioned lever is used to adjust the
cutting height from 1" (2.5 cm) to 5" (10.2 cm.) in 1/4"(.64 cm) increments. The
cutting height adjustment handle has a transport position and all adjustments
can be made while the operator remains seated. Units also have a foot
operated deck lift assist lever to aid in raising the deck.
Mulching Kit: Optional.
Overall Width:
w/60" Deck
w/66" Deck
w/72" Deck
Roll Bar - Up
Roll Bar - Down
Tread Width: (center to center of tires, widthwise)
Drive wheels
Caster wheels
Wheel Base: (center of caster tire to center of drive tire)
23, 27, & 30 HP units
28 HP Kohler EFI units
Nyloc Nut ..................................................................30-35 ft-lbs. (41-47 N-m)
Hex Capscrew...........................................................50-55 ft-lbs. (68-75 N-m)
www.mymowerparts.com
without deck deflector up
53.5 in. (135.9 cm) 61.4 in. (155.8 cm)
57.3 in. (145.5 cm) 68.0 in. (172.7 cm)
61.5 in. (156.2 cm) 74.3 in. (188.7 cm)
w/60" Deck w/66" Deck
81.9 in. (208.0 cm) 83.7 in. (212.6 cm)
92.6 in. (235.2 cm) 94.4 in. (239.8 cm)
Roll Bar - Up Roll Bar - Down
71.9 in. (182.6 cm) 53.8 in. (136.7 cm)
w/60" Deck w/66" Deck
41.9 in. (106.4 cm) 45.9 in. (116.6 cm) 45.9 in (116.6 cm)
37.3 in. (94.8 cm) 42.3 in. (107.4 cm) 47.3 in (120.1 cm)
w/60" Decks w/66" Deck
53.7 in. (136.4 cm) 55.3 in. (138.4 cm)
w/60" Deck w/66" Deck
1360 lbs. (617 kg) 1430 lbs. (649 kg)
1380 lbs. (626 kg) 1430 lbs. (649 kg)
15
deflector down
72.8 in. (184.9 cm)
79.4 in. (201.7 cm)
85.8 in. (217.9 cm)
w/72" Deck
85.8 in. (212.6 cm)
96.4 in. (244.9 cm)
w/72" Deck
w/72" Deck
59.1 in. (154.7 cm)
w/72" Deck
1530 lbs. (694 kg)
1530 lbs. (694 kg)
Torque