Resetting The Trip Odometer; Setting The Speed Average; Using The Time Screen - Magellan GPS ColorTRAK User Manual

Resetting the Trip Odometer

You may want to reset the Trip field to zero.
While viewing the SPEED screen, press MENU, highlight TRIP RESET
and press ENTER. A pop-up window will appear. Highlight YES or
NO and press ENTER.

Setting the Speed Average

You may want to reset the Speed Average field in your receiver. You can
choose from TRIP, 5, 30 seconds, 1, 5 minutes or 1 hour.
While viewing the SPEED screen, press
MENU, highlight SPEED AVG and press
ENTER. A pop-up window will appear.
Highlight the desired time frame over which
averaging will be performed and press
ENTER.
The default is 30 seconds.

Using the Time Screen

The TIME screen displays the current time,
estimated time enroute (ETE), time of arrival
and elapsed time in regards to the route you
are navigating in. The first data field can be
customized to correct the current time and to
select the time format.
Magellan GPS ColorTRAK
SPEED AVG
TRIP
5 SECONDS
30 SECONDS
1 MINUTE
5 MINUTES
1 HOUR
TIME
P
03:54:21
M
ETE
01:09:24
OF ARRIVAL
P
04:34:20
M
ELAPSED
02:24:56
29