Resetting The Trip Odometer And Trip Timer; Viewing The 'Map' Or 'Map And Compass; Editing The Navigation Fields; Changing The Number Of Navigation Fields - Magellan eXplorist GC User Manual

Pausing Trip: If you want to pause the trip to temporarily stop recording, press MENU and
highlight 'Pause Trip'. Press ENTER.
Resume Trip: After pausing the trip, you can turn trip recording back on by pressing MENU and
selecting 'Resume Trip'.
Ending Trip: When you have come to the end point of your trip, press MENU and select 'Stop and
Save Trip'. (If you have track turned off in Tools, stopping the trip also stops recording your track.)

Resetting the Trip Odometer and Trip Timer

When you start a trip the trip odometer and trip timer are automatically reset to zero. If at any time
during your trip you want to reset them to zero, follow these instructions.
1. Press MENU and highlight 'Reset Trip Odometer' or 'Reset Trip Timer'.
2. Press ENTER.

Viewing the 'Map' or 'Map and Compass'

1. Press MENU. Highlight 'Map' or 'Map+Compass' (depending upon which is currently active) and
press ENTER. This toggles between viewing just the map or viewing the map with a compass
overlay.

Editing the Navigation Fields

1. Press MENU. Highlight 'Edit Nav Fields' and press ENTER.
2. Use the joystick to highlight the navigation field you want to change.
3. Press ENTER.
4. Use the joystick to highlight one of the available data types. Press ENTER.
5. You can continue selecting other navigation fields as described here until you are satisfied with
your choices.
6. When done, press BACK to return to the Map screen.

Changing the Number of Navigation Fields

1. Press MENU. Highlight 'Edit # of Nav Fields' and press ENTER.
2. The Map screen is displayed with the current number of navigation fields displayed in the center.
Use the joystick up or down to change the number of fields (0 - 4).
3. When done, press BACK.

Selecting Heading Up or North Up

This sets the orientation of the Map screen so that the top of the display is either your heading or
north.
1. Press MENU. Heading Up/North Up is a toggle selection. Highlight the current choice, Heading
Up or North Up, and press ENTER.
2. When done, press BACK.

Viewing the Details of Your Destination Waypoint

This is available only while travelling on a route to a waypoint.
1. Press MENU.
2. Highlight 'View Details' and press ENTER.
12