Selecting Contrast; Selecting Alarm/Message; Accessing The Alarm/Message Screen - Magellan GPS ColorTRAK User Manual

Selecting Contrast

You may want to change the contrast of your receiver. The colors consist of
RED, BLUE and GREEN. You can adjust the lightness or darkness of the
colors, depending on your preference.
From any NAV screen, press MENU, high-
light CONTRAST and press ENTER. A
pop-up window will be displayed. Use the
LEFT/RIGHT ARROWs to adjust the
contrast and press ENTER.

Selecting Alarm/Message

Accessing the Alarm/Message Screen

While navigating, you may decide to set an alarmin your GPS ColorTRAK.
The GPS ColorTRAK has four types of alarms: Anchor alarm, which will
notify you when your anchored boat has drifted; Arrival alarm, which will
notify you when you are within the arrival circle of your destination ; XTE
alarm, which will notify you when you have gone off course; and Proximity
alarm, which will notify you when you are within the proximity of any
waypoints you have chosen.
From any NAV screen press, MENU and highlight ALARM/MSG. A
screen will appear with your choice of alarms and messages. Use the
UP/DOWN ARROWs to highlight your choice and press ENTER.
Sample. When the pop-up window for an
alarm is displayed, the distance and a message,
if there are any available, will appear. A
sample is shown.
46
WPT NAMES WPT NAMES CONTRAST
OFF
RED
GREEN
ON
BLUE
WPT NAMES WPT NAMES
ATTENTION
P
WPT001 IS
OFF
WITHIN 100
ON
ROCKS ON
LEFT
Magellan GPS ColorTRAK
F
T