Customizing The Data Fields; Position Screen; Selecting The Position Screen; Resetting The Trip Odometer - Magellan Meridian Series User Manual

Reference
Customizing the Data Fields — Allows you to change the data that is
being displayed to 1 of 13 data options (bearing, distance, speed,
heading, VMG, CTS, ETA, ETE, XTE, turn, elevation, time, or date)
for any of the four fields. (See explanation of Data Types in the Map
Screen section.)
From the
Large Data
Screen
The Position screens 1 and 2 simply display your present position using the
coordinate systems that you have selected in Setup. The Position 1 screen shows
all of the basic position, time and satellite information, all on one screen. In
addition, current navigation information is shown on the bottom half of the
screen.
Selecting the Position Screen — Allows you to toggle between the two
Position screens. This allows the same position to be displayed in
different coordinate systems. This is useful when comparing navigation
data between devices and charts that use different coordinate systems.
The screen viewed can be changed by pressing the Left or Right arrows
while viewing the Position screen.
You can change the coordinate system displayed by following the
instructions in Setup - Selecting the Coordinate System.
Resetting the Trip Odometer — Resets the trip odometer to 0000.00.
From the
Position
Screen
34
Highlight
MENU
Customize
Use arrows to
ENTER
select new
data type
Highlight
MENU
Reset Trip
Use arrows to
ENTER
highlight the title
for the data field to
be changed
ENTER Confirm?
Yes or No
Magellan Meridian GPS Receiver
ENTER
ENTER