Position Screen; Selecting The Position Screen; Resetting The Trip Odometer; Customizing The Data Fields - Magellan SporTrak SporTrak Color User Manual

Position Screen

The Position screens 1 and 2 simply display your present position using the
coordinate systems that you have selected in Setup. The Position 1 screen shows
all of the basic position, time and satellite information, all on one screen. In
addition, current navigation information is shown on the bottom half of the
screen.
Selecting the Position Screen — Allows you to toggle between the two
Position screens. This allows the same position to be displayed in
different coordinate systems. This is useful when comparing navigation
data between devices and charts that use different coordinate systems.
The screen viewed can be changed by pressing the Left or Right arrows
while viewing the Position screen.
You can change the coordinate system displayed by following the
instructions in Setup - Selecting the Coordinate System.
Resetting the Trip Odometer — Resets the trip odometer to 0000.00.
From the
Position
Screen
Customizing the Data Fields — Allows you to change the data that is
being displayed to 1 of 17 data options (bearing, distance, speed,
heading, VMG, CTS, ETA, ETE, XTE, turn, elevation, time, date,
COG, EPE, Avg. Speed, or Max Speed) for any of the two fields.
From the
Position
Screen
SporTrak Color GPS Mapping Receiver
Highlight
Reset Trip
Highlight
Customize
Use arrows to
select new
data type
Confirm?
Yes or No
Use arrows to
highlight the title
for the data field to
be changed
R efer ence
31