Manual Channel Scan; Auto Channel Scan - Topfield TRF-2200 User Reference

3.1.1 Manual Channel Scan

You may choose to search only for the services of a specific
transponder, since more than one service is provided via each
transponder. For this, you should choose Manual Channel
Scan from the Start Search options.
Manual Channel Scan
Scan Mode
Scan Band
Channel No.
Frequency
Bandwidth
Search
Signal Intensity
Signal Quality
Exit OK
When you press the
to set the Search options,the digital receiver starts searching
for channels. The digital receiver will display the list of found
TV and radio transmitters. When the scan is complete, you
will see the screen showing the number of TV and radio
services found.

3.1.2 Auto Channel Scan

Start Search
Manual Channel Scan
Auto Channel Scan
Antenna Supply 5V
Exit OK
The digital receiver starts to search automatically for the
available services and displays a list of television and radio
services as they are found. When the scan is complete, a
message is displayed telling how many services have been
found.
By Channel
VHF
CH06 (177500 KHz)
0%
0%
For VHF, the Channel No. varies from 52500 KHz to 226000 KHz.
For UHF, the Channel No. varies from 474000 KHz to 858000 KHz.
3.1.1 Manual Channel Scan
Select Manual Channel Scan from
the Start Search options.
Select By Channel or By Frequency
using buttons.
After choosing By Channel, you can
select the desired
(transponder), and Channel Number.
button on the Search, if it is complete
Auto Channel Scan searches the
available services automatically.
This menu operates through the
following procedures;
Select Auto Channel Scan from the
Start Search options.
15
Scan Band