2.1 Unpacking
Before going any further, check that you have received the fol-
lowing items with the digital receiver.
NOTE
Accessories may vary according to your local area.
2.2 Safety precautions
Please read carefully the following safety precautions.
Remote control
Two batteries for the remote control (AAA 1.5 V)
One HDMI cable
A copy of the User Manual
The mains voltage must range between 100 and 240 volts.
Check it before plugging the digital receiver to the wall
socket. For the power consumption of the digital re-
ceiver, refer to Table 2.1.
The wall socket should be near the equipment. Do not
run an extension lead to the unit.
7
Chapter 2
Setup