Topfield TRF-2200 User Reference page 58

50 Troubleshooting
No power / No front display
I have connected my Topfield and get no picture on the Television
I am unable to get out of the MENU
No picture through RF loop out to my Television
My Topfield recorder doesn't go to standby after instant
recording (non timer recording)
Cannot view guide content
Before you call a repair person for your Topfield product, check
the list of possible problems and solutions.
Make sure the main switch on the back of Topfield is
switched to ON.
Properly insert the power plug into the power socket.
If the power outlet is controlled by a switch, make sure
the wall switch is ON.
Remove the power plug from the wall and wait 10 sec-
onds, then plug back in.
Plug another appliance into the outlet, if the other appli-
ance doesn't work then have a qualified electrician repair
the outlet.
Plug the Topfield into a different outlet.
Check that you have connected the cables from the Top-
field to the TV
The connection must be via an AV output out of the Top-
field to an AV input of the TV.
Check that you are in the correct AV setting on the TV.
For example if you connected the Topfield box to AV2 on
the TV make sure you set your TV with the TV remote to
AV2 before the Topfield can be used.
Press the
V F
resolution.
576i/576p/720/1080i/AUTO. You may need to press the
. . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . .
button on the remote and setto the correct
. . . . . . . . . . . .
. . . .
53
53
5 3
5 3