Manual Firmware Update Via Lan Port; From Your Computer Via Usb Port - Topfield TF 600 PVRc User Manual

10.2.2 Manual firmware update via LAN port

10.3 From your computer via USB port

4. When you turn on the digital reciever, the latest firmware
will be updated automatically. If your receiver has the latest
firmware, the firmware update will be skipped.
To update the firmware manually, follow the steps below:
1. Plug a LAN calbe into the LAN port on the digital receiver.
2. Select the Installation
3. Set the Auto LAN Firmware Upgrade option to Off.
4. If you select the Installation
the digital receiver will ask you whether to start firmware
update. If you select Yes, it will be started.
You can transfer a new firmware to the digital receiver from
your computer by connecting them with a USB cable. You
need TFDN USB, a firmware transfer utility for this, which is
available from the web site, http://www.i-topfield.com.
To update the firmware with this method, perform the follow-
ing steps:
The instructions on how to use TFDN USB are as follows:
10.3 From your computer via USB port 77
LAN Setting menu.
LAN Firmware Upgrade menu,
1. Download a new firmware applicable to
your digital receiver from the Topfield
web site.
2. Plug one end of a USB cable into the USB
port on the digital receiver, and the other
end into the matching port on your com-
puter.
3. Turn on the digital receiver.
4. Run TFDN USB.