Bobbin Winding - Pfaff Passport 2.0 Owner's Manual

Bobbin winding

1. Place the thread spool on the spool pin in
horizontal position. Slide a spool cap tightly
against the spool.
2. Place the thread into the thread guide (A) from
front to back. Pull the thread clockwise around
the bobbin winder tension disc (B).
3. Thread through the hole in the bobbin (C) from
the inside to the outside.
4. Place an empty bobbin on the bobbin spindle.
5. Push the bobbin lever to the right to wind.
Press the foot control to wind the bobbin.
When the bobbin is full, release the foot
control. Push the bobbin lever to the left.
Remove the bobbin and cut the thread.
A
B
C
D
13