Inserting The Bobbin; Idt™ System (Integrated Dual Feed) - Pfaff Passport 2.0 Owner's Manual

Inserting the bobbin

Make sure that the needle is fully raised and the
machine is turned off before inserting or removing
the bobbin. Open the bobbin cover by pushing the
release button to the right (A). Remove the cover
(B).
1. Insert the bobbin in the bobbin case with the
thread running in a counterclockwise direction.
2. Pull the thread through the slit (C).
draw the thread at the arrow markings into the
stitch plate thread guide from (C) to (D).
4. Pull the thread at the arrow markings into the
stitch plate thread guide from (D) to (E).
5. To cut off excess thread pull thread back over
the cutting off blade at point (E).
6. Replace the bobbin cover.
IDT™
feed)
For sewing any fabric precisely, PFAFF®
passport™ sewing machine provides the ideal
solution: the integrated dual feed, IDT™ system. As
on industrial machines, the IDT™ system feeds the
fabric from the top and bottom at the same time.
The fabrics are fed precisely. On light fabrics such
as silk or rayon the dual feed prevents puckering
of the seam. The even feeding action also ensures
perfect matching of checked and striped fabrics.
The IDT™ system keeps all layers of quilt projects
aligned to prevent shifting of the layers.
Engaging the IDT™
Important: For all work with the IDT™ system, use
presser feet with the center back cut-out (F).
Raise the presser foot. Press the IDT™ system down
until it engages.
Disengaging the IDT™
Raise the presser foot. Hold the IDT™ system with
system down, then pull it away from you to release
the IDT™ system slowly upward.
14
1
3
D
IDT™
2
B
A
4
C
E
F