Pairing A New Gps Sensor With The Training Computer; Pairing A New Stride Sensor With The Training Computer - Polar Electro RCX3 User Manual

Pairing a New GPS Sensor with the Training Computer

Make sure the GPS sensor has been correctly attached in an upright position and that your are wearing the
GPS sensor on the same arm as you are wearing your training computer. Also make sure you have turned
the GPS sensor on. For more information on how to set up the GPS sensor refer to the user manual of the
GPS sensor. The user manual can be downloaded at www.polar.fi/support.
1. Go to MENU > Settings
2.
Searching for new GPS sensor
signal.
3. Once the new GPS sensor is identified,
4. If the search is not successful,
Try again? YES / NO
5. Select to start the search again.
YES
6. Select to cancel the searching.
NO
7. To return to time mode, press and hold the BACK button.

Pairing a New Stride Sensor with the Training Computer

Make sure the stride sensor has been correctly attached to your shoe. For more information on setting up
the stride sensor refer to the user manual of the stride sensor or to the video tutorial at
http://www.polar.fi/en/polar_community/videos.
You can only pair one stride sensor to the training computer at a time. If you pair a new sensor, the new
sensor always replaces the previous one you had paired. The stride sensor can only be paired to the
Running sport profile.
1. Go to >
MENU Settings
2.
Searching for new stride sensor
sensor signal.
3. Once the new stride sensor is identified,
4. If the search is not successful,
,
further. Try again? YES / NO
5. Select to start the search again.
YES
6. Select to cancel the searching.
NO
7. To return to time mode, press and hold the BACK button.
> Sport profiles > Running
is displayed. The training computer starts searching for the GPS sensor
GPS sensor found
GPS sensor not found
is displayed.
> >
Sport profiles Running
is displayed. The training computer starts searching for the stride
Stride sensor found
Stride sensor not found
is displayed.
> GPS sensor > Search new
is displayed. Pairing is complete.
or
Other GPS sensors interfering. Move further.
> >
Stride sensor Search new
is displayed. Pairing is complete.
or Other stride sensors interfering. Move
Using a New Accessory
ENGLISH
and press OK.
,
and press OK.
37