Polar Electro RCX3 User Manual page 28

ENGLISH
•
Training view numbering
training view appears for a few seconds when you browse the training views with UP/DOWN.
• : Select
Training view 3 rows
according to your selection.
Bike Settings
To view or modify bike settings select
> /
Bike 1 settings Bike 2 settings
• : Select
Speed sensor
• : Set the wheel size to xxxx mm. For more information, on measuring the wheel size, see
Wheel size
Measuring Wheel Size.
• : Select
Cadence sensor
• : Set or
Autostart Off On
YES/NO is displayed. Select
displayed.
All the new sensors must be paired with the training computer before they can be activated.
For more information on pairing a new sensor to the training computer see Using a New Accessory
(page ? ).
Measuring Wheel Size
Select > >
MENU Settings
size > Set wheel size
Wheel size settings are a prerequisite for correct cycling information. There are two ways of determining
the wheel size of your bike:
Method 1
Look for the diameter in inches or in ETRTO printed on the wheel. Match it to the wheel size in
millimeters in the right column of the chart.
ETRTO
25-559
23-571
35-559
37-622
47-559
20-622
52-559
23-622
25-622
28-622
32-622
42-622
47-622
28 Settings
: Select or . If you set the
On Off
or . The training information will be displayed on three or two rows
2 rows
>
MENU Settings
, or .
Off On Search new
, or .
Off On Search new
. If you select ,
On Speed sensor for bike required
YES and Autostart on
>
Sport profiles Cycling (Bike 1)/Cycling 2 (Bike 2)
Wheel size diameter (inches)
26 x 1.0
650 x 23C
26 x 1.50
700 x 35C
26 x 1.95
700 x 20C
26 x 2.0
700 x 23C
700 x 25C
700 x 28
700 x 32C
700 x 40C
700 x 47C
Training view numbering On
> >
Sport profiles Cycling (Bike1)
,
is displayed. If you select
Wheel size setting (mm)
, the number of the
/
Cycling2 (Bike 2)
Activate speed sensor
NO , Activation canceled is
> >
Bike 1 settings Wheel
1884
1909
1947
1958
2022
2051
2054
2070
2080
2101
2126
2189
2220