Changing The Name For Each Input (Name) - Sony STR-ZA3000ES User Manual

jacks (Input Assign)."
Input Mode
You can set the input mode for each input. For details, see "Switching between digital and
analog audio (Input Mode)."
Preset Sound Field
You can assign a default "Sound Field" to each input source that will be selected
automatically when you select the input source.
In-Ceiling Speaker Mode
You can select whether or not to use the In-Ceiling Speaker Mode with the current input.
A/V Sync
You can delay the output of audio to minimize the time gap between audio output and visual
display.
Subwoofer Low Pass Filter
You can turn on or off the low-pass filter for the subwoofer output. The low-pass filter works
when PCM signals are input via an HDMI connection. You can set the function for each input
to which an HDMI input jack is assigned independently. Turn the function on if you connect a
subwoofer without the crossover frequency function.
Subwoofer Level
You can set the level of the subwoofer to 0 dB or +10 dB when PCM signals are input via an
HDMI connection. You can set the level for each input to which an HDMI input jack is
assigned independently.
Trigger 1 to 3 (for STR-ZA3000ES)
Trigger (for STR-ZA2000ES/STR-ZA1000ES)
You can select input options for use of the 12V Trigger function.
[61] Adjusting Settings

Changing the name for each input (Name)

You can enter up to 8 characters for each input name.
1. Select [Setup] - [Input Setup] from the home menu.
2. Select the input name you want to change.
Input Setup