Sony STR-ZA3000ES User Manual page 98

2. Select [Auto Standby].
3. Select the setting you want.
On: The receiver switches to standby mode after approximately 20 minutes.
Off
Note
This function does not work in the following cases:
[FM TUNER] or [AM TUNER] is selected as the input.
The software of the receiver is being updated.
If you use the Auto Standby mode and the sleep timer at the same time, the sleep timer
has priority.
[108] Adjusting Settings
Changing the volume display (Volume Display)
Set the volume display on the display panel and GUI.
1. Select [Setup] - [System Setup] from the home menu.
2. Select [Volume Display].
3. Select the setting you want.
Relative : Indicates the volume in dB.
Absolute : Indicates the number of steps.
[109] Adjusting Settings
Switching the brightness of the display panel (Dimmer)
Switch the brightness of the display panel between 3 levels.
1. Select [Setup] - [System Setup] from the home menu.
2. Select [Dimmer].
System Setup
System Setup