Enjoying Sound Effects; Selecting The Sound Field; Name Input - Sony STR-DN840 Operating Instructions Manual

Naming preset stations

(Name Input)

1
Select "FM" or "AM" from the
menu, then press
2
Select "Select Preset", then press
.
3
Select the preset number which
you want to name, then press
then press OPTIONS.
4
Select "Name Input", then press
.
5
Press V/v repeatedly to select a
character, then press b.
You can move the input position
backward and forward by pressing
B/b. You can enter a name up to 8
characters.
6
Repeat step 5 to input a character
one by one, then press
The name you entered is registered.
Note
Some letters that can be displayed on the TV
screen cannot be displayed on the display panel.
Selecting the sound
.
field
1
,
2
3
Tip
You can select the sound field you want by
pressing SOUND FIELD +/– repeatedly on the
remote control. You can also use A.F.D./2CH,
Movie or Music on the receiver.
.
Auto Format Direct (A.F.D.) mode: This
mode allows you to listen to higher fidelity
sound and select the decoding mode for
listening to a 2 channel stereo sound as
multi channel sound.
2 channel sound mode: You can switch
the output sound to 2 channel sound
regardless of the recording formats of the
software you are using, the playback
equipment connected, or the sound field
settings of the receiver.
x A.F.D. Auto (A.F.D. AUTO)
Presets the sound as it was recorded/
encoded without adding any surround
effects.
However, for USA and Canada models,
this receiver will generate a low frequency
signal for output to the subwoofer when
there is no LFE signals.

Enjoying Sound Effects

Select "Sound Effects" from the
home menu, then press
Select "Sound Field", then press
.
Select the sound field you want.
Auto Format Direct
(A.F.D.)/2 channel sound
mode
.
51
US