Reverting To The Factory Default Settings; Front Panel - Sony STR-ZA3000ES User Manual

[122] Adjusting Settings

Reverting to the factory default settings

You can clear all memorized settings and restore the receiver to the factory default settings
by the following procedure. This procedure can also be used to initialize the receiver before
you use it for the first time.
Be sure to use the buttons on the receiver to perform this operation.
1. Turn off the receiver.
2. Hold down
[MEMORY CLEARING] appears on the display panel for a while, then changes to
[MEMORY CLEARED!] .
Note
Do not turn the receiver off until [MEMORY CLEARED!] appears on the display panel.
[123] Parts and Controls

Front panel

With the front cover
1. (on/standby)
Turns the receiver on or sets it to standby mode. The indicator lights up according to
the status of the receiver. Also, the color of the indicator changes depending on the
Reverting to the factory default settings
(on/standby) on the receiver for 5 seconds.
Receiver