Reverting Back To The Factory Default Settings - Sony STR-DH540 Operating Instructions Manual

Input name
Assignable OPT1
audio input
OPT2
jacks
COAX
None
* Default setting
Notes
• When you assign the digital audio input, the INPUT MODE setting may change automatically.
• One reassignment is allowed for each input.
Reverting back to the
factory default settings
You can clear all memorized settings and
revert the receiver back to the factory
default settings by performing the
following procedure. This procedure can
also be used to initialize the receiver before
you use it for the first time.
Be sure to use the buttons on the receiver to
perform this operation.
?/1
1
Press ?/1 to turn off the receiver.
2
Hold down ?/1 for 5 seconds.
The "CLEARING" appears on the
display panel for a while, then changes
to "CLEARED !".
Changes or adjustments made to the
settings are now reset to the defaults.
52
GB
BD DVD
a a
a a
a a
a* a*
GAME SAT/
CATV
a a*
a a
a a
a* a
VIDEO SA-CD/
CD
a a
a a
a a*
a* a