Tuning Step Settings; Fm St. (Fm Stereo) - Tecsun PL-680 Operation Manual

TECSUN RADIOS AUSTRALIA

TUNING STEP SETTINGS

There are three tuning step speed
settings: slow, fast, and intelligent (slow &
fast). In Frequency Mode (VF), press &
hold the [STEP] button to select your
preferred setting.
The intelligent tuning step notices when
you rotate the [TUNING] knob in a slow or
fast way. When rotating fast, the tuning
steps will be larger.
NOTE: intelligent tuning step is not available for Air Band.
TUNING
STEP
BAND
FM
MW
LW
SW
AIR

FM ST. (FM STEREO)

1. When listening to radio broadcastings through stereo earphones,
press the [FM.ST] button to activate the stereo function; the "
symbol appears on the display. If the FM signal is too weak, it is
advised to turn off the stereo function by pressing the [FM ST.]
button again; the "
2. When listening to FM stereo through a speaker, it is advised to
turn off the stereo function to improve sound quality.
3. The stereo function will not be activated and the "
will not appear if the FM station is not in stereo broadcasting.
16
SLOW TUNING STEPS
Slowly rotate the [TUNING] knob
0.01 MHz
1kHz
1kHz
1kHz
1kHz
" symbol disappears.
www.tecsunradios.com.au
flashing
Long-press
FAST TUNING STEPS
Quickly rotate the [TUNING] knob
0.1MHz
9kHz / 10kHz
9kHz
5kHz
25kHz
" symbol
"
PL-680