Creating A Man Overboard Waypoint - Lowrance ELITE Ti Operator's Manual

- The measuring icons appear with a line drawn from the vessel
center to the cursor position, and the distance is listed in the
cursor information window.
2.
You can reposition the measuring points by dragging either
icon as long as the measuring function is active
Note:
Ú The bearing is always measured from the grey icon
to the blue icon.
You can also start the measuring function without an active cursor.
Both measuring icons are then initially located at the vessel position.
The grey icon follows the vessel as the vessel moves, while the blue
icon remains at the position given when you activated the function.
You terminate the measuring function by selecting the Finish
measuring menu option.

Creating a Man Overboard waypoint

If an emergency situation should occur, you can save a Man
Overboard (MOB) waypoint at the vessel's current position by
pressing the Zoom In (+) and Zoom out (-) keys simultaneously.
When you activate the MOB function the following actions are
automatically performed:
• a MOB waypoint is created at the vessel's position
• the display switches to a zoomed chart panel, centered on the
vessel's position
• the system displays navigation information back to the MOB
waypoint
Multiple MOB waypoints are saved by repeatedly pressing the MOB
buttons. The vessel continues to show navigation information to
the initial MOB waypoint. Navigation to subsequent MOB waypoints
needs to be done manually.
Cancel navigation to MOB
The system continues to display navigational information towards
the MOB waypoint until you cancel the navigation from the menu.
Display MOB waypoint information
You can display MOB information by selecting the MOB waypoint
and then the MOB waypoint pop-up.
Basic operation | ELITE Ti Operator Manual
23