Using The Remote Control Unit - Sanyo SAP-KCRV243GJH Technical & Service Manual

9-1. Using the Remote Control Unit

How to Install Batteries
Cover
NOTE
How to Use the Remote
Control Unit
1. Slide the cover in the direction indicated by the arrow and remove it.
2. Install two AAA alkaline batteries. Make sure the batteries point in the direction
Marked in the battery compartment.
3. Use a thin object such as the tip of a pen to press the ACL button.
ACL button
The batteries last about six months, depending on how much you use the remote
control unit.Replace the batteries when the remote control unit's display fails
to indicate, or when the remote control cannot be used to change the air
conditioner's settings.
Use two fresh leak-proof type-AAA alkaline batteries.
In replacing batteries, follow the instructions as mentioned in the sub-section
"How to Install Batteries".
If you do not use the remote control unit more than 1 month, take out the batteries.
When using the remote control unit, always point the unit's transmitter head directly at
the air conditioner's receiver.
Air conditioner
(Indoor unit)
Remote control
unit
Receiver
(Transmitter head)
52