Table of Contents
Advertisement
9-2. Remote Control Unit Installation
Position
The remote control unit can be operated from either a
non-fixed position or a wall-mounted position.
To ensure that the air conditioner operates correctly, do
not install the remote control unit in the following places:
In direct sunlight
Behind a curtain or other place where it is covered
More than 8 m away from the air conditioner
In the path of the air conditioner's airstream
Where it may become extremely hot or cold
Where it may be subject to electrical or magnetic
interference
Mounting on a Wall
a) Removable mounting
1) Momentarily hold the remote control unit at the
desired mounting position.
2) Confirm that the air conditioner responds correctly
when you press keys on the remote control from
that position.
3) After confirming correct operation, use a
screwdriver to screw the supplied special
mounting screw into the wall. (Fig.6a)
4) Hang the remote control unit from the mounting
screw.
b) Non-removable mounting
1) Momentarily hold the remote control unit at the
desired mounting position.
2) Confirm that the air conditioner responds correctly
when you press keys on the remote control from
that position.
3) After confirming correct operation, use a
screwdriver to screw the supplied special
mounting screw into the wall. (Fig.6a)
4) Remove the remote control cover by sliding it
downward.
5) Remove the batteries of the remote control unit.
6) Use a screwdriver to screw the remote control unit
securing screw into the wall through the hole in the
battery compartment. (Fig.6b)
7) Replace the batteries.
8) Again confirm that the remote control unit operates
correctly.
Removable mounting
Non-removable mounting
Screw
19
Special
mounting
screw
Fig.6a
Wall
Fig.6b
Wall
Advertisement
Table of Contents
