Operation With The Remote Control Unit - Sanyo SAP-KCRV243GJH Technical & Service Manual

9-2. Operation with the Remote Control Unit

1. Automatic Operation
STEP1 Press the MODE selector button and select
STEP2 Press the ON / OFF button and switch the air conditioner ON.
Press the temperature setting buttons (TEMP.).
STEP3
The air conditioner starts operating after automatically selecting the type of operation-whether heating,
drying (dehumidifying) or cooling-that suits the conditions in the room, and automatically adjusting the
temperature, fan speed and airflow direction.
Type of operation
Each time one of the temperature setting buttons (TEMP.) is pressed, the temperature is changed by 1**
AIR CONDITIONER
A
A
HIGH
POWER
1HR.
ON OFF
Standard temperature settings during automatic operation
Heating
Drying
(The exact temperature depends on the prevailing temperature
Cooling
A
NORMAL
PM
A A
PM
A
ON . I/OFF . O
TEMP.
ECONOMY MODE
(AUTO).
A
Standard temperature setting
20* to 26* range
when the unit starts operating.)
The temperature can be changed from +4*(higher) to -4* (lower)
from the standard temperature setting.
(The upper limit during cooling is 30*.)
53
STEP 2
STEP 3
STEP 1
24*
27*