Login - Yamaha QL5 Reference Manual

Hide thumbs Also See for QL5:
Table of Contents

Advertisement

CREATE USER KEY window
2
1
5
1
USER NAME
Displays the user name. Press this area to access a keyboard window, in which you can
enter a user name of up to eight characters.
2
COMMENT
Displays a comment about the user. Press this area to access a keyboard window, in
which you can enter a comment of up to 32 characters.
3
PASSWORD
Enables you to specify a password. Press this area to access a keyboard window, in which
you can enter a password of up to eight characters.
4
POWER USER
Specifies whether Power User privileges will be granted to this user.
5
ACCESS PERMISSION
These settings specify the range of operations that the user can perform. For details on
each item, refer to
page
190.
NOTE
In the case of the QL1, faders that do not exist on the model will not be shown.
3
4
Logging-in
To operate the QL series console, you must log in as the Administrator, Guest, or a User.
User settings for the Administrator and Guest are saved in the console itself. However, to log
in as a User you must either select a key that is saved in the console itself, or connect the
USB flash drive in which a user authentication key has been saved. If you use a user
authentication key on a USB flash drive, you will continue as the logged-in user even if you
remove the USB flash drive after logging-in.
NOTE
If the power is turned off and then on again, the console will generally start up in the log-in state
in which the power was turned off. If a user password has been assigned, you will need to enter
the password. However if you cancel the input, you will be forcibly logged-in as Guest.
 Logging-in as Administrator
STEP
1. In the Function Access Area, press the SETUP button.
2. In the SETUP screen, press the CURRENT USER button.
3. In the LOGIN window, press the ADMINISTRATOR button.
4. Enter the password and press the OK button.
SETUP screen
NOTE
• If no Administrator password has been set, you will simply be logged-in in step 3 when you press
the LOGIN button. If a password has been set, a keyboard window will appear, allowing you to
enter the password.
• If the password was incorrect, a message of "Wrong Password!" will appear near the bottom of
the screen.
187
LOGIN window
Reference Manual
Setup

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ql1Ql series

Table of Contents